Carbon fiber wheels provide various benefits that the traditional bicycle version cannot provide. This is especially true of the unique features of the wide-sided 88 mm wheels.

Aerodynamic Design

Generally, the weight of 88 mm carbon tube wheels will be heavier than 60 mm or 50 mm tube wheels. This is simply due to the extra rim depth. This extra weight is only a small disadvantage; because the extra depth of your bicycle rim gives it a greater aerodynamic advantage compared to the other two varieties.

According to research conducted by Human Kinetics, wheels with better aerodynamic design can produce favorable lift effects in slight crosswinds. This helps offset the resistance that would normally hinder riding speed. Therefore, despite the heavier weight, wider rims provide a greater advantage in increasing riding speed.

However, it is best to install 88mm carbon tube wheels on the rear of the bicycle;whereas the 50mm. The wheels can be placed in the front. This is because the turbulent wind may cause unstable steering. The wider 88 mm carbon tube rim has a larger surface area and is more prone to instability, so it is difficult to maintain a straight line during riding.

Quick Spinning

Carbon fiber bicycles are designed to have as little frictional resistance as possible. Reputable manufacturers use the most innovative bearing technology to minimize friction. This provides easy and fast spinning action, allowing the cyclist to maximize the use of the smallest force. Considering that even the smallest improvement can determine a win in any race, additional modifications to the bicycle bearing are a major factor.

Stability

It is not enough to have an aerodynamically designed bicycle wheel with minimal friction. The way this wheel is installed on your bike also affects all these other benefits. The correct or improper installation of the wheel on the bicycle will affect all important aspects of stability. Without stability, you are prone to serious collisions, especially during games.

One key parameter can be used to determine the stability of the bicycle: the path. This is the distance between the point where the projection of the steering shaft touches the ground and the point vertically below the center of the bicycle wheel. According to Human Kinetics, the bike will feel very stable and rideable between 3.8 cm and 6.4 cm.

Through your riding experience, you will realize that a steeper steering axis and fewer trajectories will produce faster steering, but will have poorer stability during the race. On the other hand, if you choose a larger path with a larger tilted steering axis, you will have a very stable bike. This is very useful on rough and bumpy roads. However, your speed will be very slow. This is why racing cars usually set the steering axis at 73o and 4.4 cm paths, while mountain bikes usually set the steering axis at 65o and a wider path of 6.4 cm.

Determining the most suitable steering axis trajectory and tilt will depend on your personal feelings. This means that you may need to install the bicycle wheels on different bicycle frames before you can get the best fit.

ABOUT OUR 88mm Rims:700C 25mm Width 88mm Depth Tubular Carbon Rims manufacturers - Gofastrim.com